Qualified sample validation covers drawing baseline, dimensional & GD&T inspection, material & heat treatment, NDT, cosmetic standard, functional fit test, finishing treatment, production tooling status, documentation and sample retention rules.
- Drawing & Technical Baseline Check drawing revision, 3D model, tolerance grade (ISO 8062 CT), GD&T datum, parting line, gating remnant area, repair allowance and marking requirements. Confirm special tests: PT, MT, RT, hydrostatic test or air leak test.
- Dimensional & Geometric Tolerance Submit full FAI report. Focus on assembly datum, wall thickness, radius, concentricity, position tolerance and flatness. Separate as-cast dimensions and machined dimensions. For multi-cavity moulds, inspect samples from different cavities to verify process repeatability.
- Material & Heat Treatment Verify grade, standard (AISI / EN / GB), heat number, MTC certificate. Confirm heat treatment procedure, hardness, mechanical properties and decarburization. For stainless steel, ferrite content and intergranular corrosion requirements shall be agreed. Define scrap return ratio clearly.
- Non-Destructive Testing (NDT) For pressure-bearing and load-critical castings: PT, MT, RT, UT, hydro or air leak test with agreed acceptance level, to detect internal shrinkage, porosity and inclusions.
- Appearance & Surface Finish Lock cosmetic acceptance criteria: surface roughness Ra, shot blasting uniformity, defect limits for cold shut, porosity and inclusions. Define grinding area and forbid grinding on sealing surfaces. Confirm plating, passivation, coating, salt spray requirement and masking zone to prevent deformation or hydrogen embrittlement.
- Assembly & Functional Test Fit with mating components to check clearance and interference. Inspect threads with go/no-go gauges. Test stroke, torque for moving parts and leak tightness for sealing components.
- Tooling & Production Process Confirm whether the sample is made from production wax mould, with fixed tree assembly, shell making, dewaxing, firing and pouring parameters. Any tooling or process change requires re-submission for re-approval. Prototype samples cannot be used as mass production reference.
- Inspection, Packaging, Compliance & Golden Sample Control Agree inspection method, sampling plan, anti-rust packaging and thread protection. Meet REACH / RoHS for export orders. Sign sample approval document, keep golden samples and limit samples on both sides. All concessions must be recorded in writing.
Rigorous sample qualification guarantees stable casting quality and reduces supply chain risk. We provide custom silica sol investment casting, FAI inspection, sample sign-off and volume production service for construction machinery, forklift, hydraulic, marine and oil & gas OEM customers.